---
title: "Plaato Airlock Logging After the Plaato Cloud | BrewForge"
description: "Plaato’s cloud is gone, your airlock still works. Forward its bubbles per minute and temperature from open-plaato-keg to BrewForge and chart them on your brew."
url: "https://brewforge.sh/integrations/plaato-airlock"
language: "en"
---

# Your Plaato Airlock, back on a fermentation chart.

Plaato shut down its cloud, but the airlock still counts bubbles. Forward its bubbles per minute and temperature from a community server running open-plaato-keg to BrewForge, and see fermentation activity on the brew it belongs to.

[Start free](https://brewforge.sh/register) [See the setup](https://brewforge.sh/integrations/plaato-airlock#setup)

## Bubbles per minute on the fermentation chart

Every reading lands on the brew the airlock is connected to, even without a gravity value. The fermentation chart gets a **Bubbles/min** layer with its own axis next to temperature, so you see when fermentation starts, peaks and slows down.

- Own Bubbles/min axis; switch the layer off like any other
- Bubbles per minute in the latest reading, recent readings, daily averages and all readings
- Temperature converted to °C when the server sends °F

## A page for the airlock itself

On the **Devices** page the airlock is listed under **Hydrometers and airlocks** with its latest values, for example 14 bpm · 19.6 °C. Its device page shows the latest reading, every stored payload under **Recent data** with a Bubbles/min column, the brew it logs and its webhook URL.

- Latest bubbles per minute and temperature
- Recent data with the payload as received
- Which brew the readings go to

## Pair it with a hydrometer for gravity

The airlock shows activity, not attenuation. For projected final gravity, attenuation and the spunding forecast, BrewForge needs gravity readings: connect a hydrometer such as an iSpindel or a Tilt to the same brew, or enter a sample by hand. Several devices can log one brew.

## Set up in three steps

You need a Plaato Airlock that reports to a community server running [open-plaato-keg](https://github.com/DarkJaeger/open-plaato-keg), self-hosted or a public one for former Plaato users. Depending on the server, that can mean re-flashing the airlock; follow the server’s instructions.

1. **Add the device in BrewForge**: Open **Devices** → **Add device**, choose **Plaato Airlock**, name it and copy the webhook URL from the **Connect** step.

2. Enable the Brewfather integration on the server

   On the community server, open the airlock’s settings, enable the **Brewfather** integration and paste the BrewForge webhook URL as its URL.

3. **Connect it to your brew**: On the device page, use **Connect** and pick the fermenting brew. Readings from then on go to that brew.

Device Created · Plaato Airlock

Webhook URL

`https://brewforge.sh/api/devices/webhook?key=3f9c2a7e-…`

The Connect step and the device page show these steps too.

## Example payload

Community servers forward the airlock in the original Plaato webhook shape. BrewForge reads `bpm` (or `bubbles_per_min`) and `temp` (or `temperature`), and converts Fahrenheit when `temp_unit` is °F.

`sg`, `og` and `batch_volume` are ignored: the server only repeats values you typed in.

```
{
  "device_name": "Airlock FV1",
  "temp": 19.6,
  "temp_unit": "°C",
  "bpm": 14,
  "sg": 1.048,
  "og": 1.048,
  "batch_volume": 20
}
```

## If readings don’t show up

- Check that the airlock still reports to the community server. BrewForge only receives what the server forwards.
- Copy the complete webhook URL, including `?key=…`.
- Pick the **Plaato Airlock** device type. The type can’t be changed later: delete the device and add it again.
- Readings arrive but not on your brew: connect the device to the brew.
- Open **Recent data** on the device page to see the last payloads BrewForge received.

Device logging is included in every plan: Free (up to 20 brews), Basic and Pro.

[Compare plans](https://brewforge.sh/pricing)

## Related

- [Fermentation tracking](https://brewforge.sh/features/fermentation): Charts, projected FG and spunding forecast.
- [iSpindel](https://brewforge.sh/integrations/ispindel): Three-step setup for iSpindel and Hydrom.
- [Custom webhook](https://brewforge.sh/integrations/custom-webhook): Log any other bubble counter that sends HTTP.
- [Plaato Airlock docs](https://docs.brewforge.sh/docs/devices/plaato-airlock): Setup, fields and what the chart shows.

## FAQ: Plaato Airlock questions

**Does this work now that Plaato’s cloud is gone?**

Yes. BrewForge doesn’t use Plaato’s cloud. It receives the data from a community server running open-plaato-keg, which your airlock reports to instead.

**Does BrewForge show gravity from the Plaato Airlock?**

No. The airlock measures bubbles per minute and temperature, not gravity, and the SG you type into the server is ignored. For gravity, connect a hydrometer to the same brew or enter samples by hand.

**I have a different bubble counter. Can I log it too?**

Yes, if it can send HTTP. Add it as a Custom webhook and map its field to Bubbles per minute.

**Do I need a paid plan for the Plaato Airlock?**

No. Devices can be connected on every plan, including Free (up to 20 brews).

## Your next batch starts here.

Free for up to 20 brews. No credit card.

[Create free account](https://brewforge.sh/register)
